TPT02 wireless temperature monitoring and gps tracking systems which are cost effective and cloud based for wireless end-to-end cold chain monitoring. The GSM LBS temperature monitors vehicles, cargo, their condition and environment automatically.
You will have full visibility and traceability to your supply chain and operations. The system provides real-time temperature and location information throughout the transport and storage time. If temperatures limit values are exceeded, the service automatically sends alerts on your mobile and email. The iphone Android app and web based reporting enhance your customer service, product quality and business profitability.
Sensors
Diweitrack TPT02 has a complete suite of sensors designed specifically to ensure your high dollar or time sensitive cargo is being handled safely. Hover over or click an icon below to learn more about each sensor.
Location
TPT02 devices can determine location through GSM LBS, Assisted LBS, Wi-Fi, and Cellular Location-Based Services (LBS)
Temperature
TPT02 has an on-board temperature sensor for ambient temperature measurements. It also is capable of working with an optional external temperature probe which allows for extended temperature ranges and use in harsher environments
Humidity
Many products are sensitive to, and can be damaged by, changes in relative humidity. TPT02's are able to sense ambient RH.
Light
Measuring light is a valuable indicator to alert you when a box or container is opened (thus letting in light).
Infrared
Measuring infrared light is a valuable indicator to alert you when a box or container is opened in the dark.
Shock
Shock detection can alert you to sudden impacts that an asset is subjected to such as handlers tossing products or otherwise handling them roughly.
Drop
TPT02 devices can Drop detection can alert you immediately if a product is dropped or falls.
Vibration
For some types of cargo, excessive vibration can be damaging and indicative or poor care and handling. The PT300 includes a vibration sensor that can alert you when conditions cause concern.
Motion
Motion detection has many uses, including the ability to put the unit to sleep to extend battery life and minimize data and network connection charges.
Signal
TPT02 Device can measure and record the strength of the mobile phone signal received by the device from the cellular network. Also referred to as RSSI or “Received Signal Strength Indication
Battery
TPT02 devices have a battery level sensor which provides an accurate indication of battery capacity remaining.
The Need For Monitoring Refrigerated Trucks Temperature
Without Refrigerated trucks, it would be nearly impossible for transporting temperature sensitive goods. It is a mandate to maintain the temperature when transporting temperature sensitive goods to reduce wastage and maintain compliance.
Reduce Wastage
35% of the manufactured goods are wasted during transportation due to improper storage of temperature sensitive goods
Be Proactive
Truck companies can get alerted if there is a temperature failure. So, they can take proactive measures to avoid any wastage.
Monitoring
Truck companies need to log the refrigerated truck’s temperature at regular intervals for compliance and regulatory purpose.
Compact Sensor
TPT02 GPS temperature monitor is small and compact wireless sensors.
Battery Operated
The built-in rechargeable battery provides better reliability
Accessorize
A range of accessories is available for mounting, waterproofing, etc.
The Application
With Diweitrack Web and mobile application can give the assets temperature in real time. The application gives a birds eye view of all refrigerated trucks that are monitored – their location, temperature, speed, last pit stop etc. in a simple map or table view. The temperature along with location history can be downloaded as weekly, monthly report.
Simple Dashboard
Birds-eye view of all refrigerated trucks temperature and location
Get alerted
Get alerted when the temperature goes beyond the set threshold.
Monitoring History
Downloaded historical data for billing and compliance reports
1. Switch on the device
• Press the green power button for 3 seconds
• A slow blinking blue light says device has found a network connection
• A slow blinking red light says low battery (device can be charged via microUSB)
2. Attach the device to goods
• For first time use, gently peel the backing away from the adhesive on reverse of device
• Press device firmly against the exterior packaging of goods being monitored or place inside cartons
• For repeated use, the device can be attached to goods with tape, string or cable tie (avoid covering the light sensor)
3.Charging the Device
•For best results, the device should be fully charged before first use.
•Once fully charged, the device should maintain its charge for about 2 months.
•A continuous red light during charging means the device is fully charged.
4.Specification
GSM LBS Temperature Tracker
Temperature Accuracy +/- 0.5°C
between -20°C and 20°C
Battery capacity: 1800mAh, Standtime 7days
IP66 for dust/moisture proof – in cold chain
Door openings monitored via light sensor
Alerts via SMS or web
Location via LBS cell tower vectoring – no GPS needed
GSM GPRS Quad Band (850/900/1800/1900 MHz)
Shock sensor
BATTERY:Type: Rechargeable Li-ion
Capacity: 1800mAh
Battery Life: 10 Months**
ACCESSORIES AND CUSTOMIZATION
Rugged hard IP67 case*
Extended Battery*
POWER:
Charger Type: Micro USB
Power Input: DC/5V, 1Amp
Time to full charge: 2 hours
ACCESSORIES
Micro USB recharging cable (included)
Power adapter (included)
CELLULAR NETWORKS
GSM/GPRS
ENVIRONMENT
Operating: -20ºC to 60Cº
5.FAQ
What’s the purpose of the Red LED on the device?
The Red LED represents battery condition.
When the battery is low, the red light will blink slowly.
While being charged, the red light blinks rapidly.
Once fully charged, the red light glows continually.
What’s the purpose of the Blue LED on the device?
The Blue LED represents wireless connectivity.
When the device is first switched on, the blue light will blink rapidly, searching for a mobile phone signal.
When a signal is found, the blue light will blink slowly.
The blue light will switch itself off after 2minutes to conserve the battery.
When you switch the device off, the blue light will glow continually before shutting down.
How do I charge the device?
The battery should be charged before each usage. The device will only be partially charged when you first receive it.
The battery can be charged via the charger or via a USB cable from your laptop. While being charged, the red light on the device will blink rapidly.
Once fully charged, this red light will glow continually.
The battery level of a device can be monitored via the web application. An alert notification will occur if the battery levels drops too low.
These alerts can be configured via the Alert Rules section of the web application.
Why is device location only approximate?
The device determines location via LBS cell tower triangulation and, unlike GPS, requires no satellite visibility.
Accuracy will vary depending on the number of cell towers in the area. In large cities, typical accuracy is +/-500m. In remote rural areas, the accuracy may be +/-3000m.
How accurate is the temperature sensor?
The temperature sensor is accurate to +/-0.5°C for typical cold chain temperatures (-20°C to 20°C).
